 |
 |
 |
 |
 |
 |
 |
| Sampling Plan¡G |
| 1. Produce process examine prodcut step every day.Sample
products at ecah produce process more than 5 PCS. 2. Purchase materials, deliver finished products and joint production according to the association regulations MIL-STD-105E execute normal, strict, light examination. |
| Sampling Way¡G |
| Accroding to sampling plane. |
| Pass Standard¡G |
| Accroding to MIL-STD-105E AQL¡GMAJ1.0 MIN4.0¡C |
| Examination Standard¡G |
| Accroding to MIL-STD-105E second standard. |
| Determine¡G |
| Products could not be fabricated belong with MAJ, others condition belong with MIN¡C |
| Examination Item¡G |
| According to product examination standard. |
| Mark after Examination¡G |
| 1. The products condition has been decided. Accroding
to the condition, stick the notice. 2. If products size is too small to stick notice, paste the small label. ( Blue label means O.K, Red label means disqualification, Yellow means special pleading ) |
| Appearance of Products Standard¡G |
| 1. Accroding to EFA QC-C0192 defect of appearance diagram..
2. Suitable Standard (1) Surface Area within 40 mm2 , allow one scrape or stain¡F (2) Surface Area within 200 mm2 , allow two scrape or stain¡F (3) Surface Area over 200 mm2 , allow three scrape or stain¡F (4) Distance from stain to stain must be over 50 mm . |
| Appearance of Examination Environment¡G |
| 1. Normal indoor light¡F 2. Distance from eyes to products around 30 cm ¡ã 50 cm ¡F 3. Check 5 second¡F 4. Angle of view around 45 degree¡C |
